Let’s imagine a scenario for a moment. You’ve just bought a new car. You’re admiring it, but within the first few days of owning it, it gets a little dirty. You decide you’re going to wash it.
It might seem as though the steps you should go through to wash your new car would be self-explanatory. However, there are definitely some actions that you should avoid in this situation.
Whether you’re on the lookout for a used Mercedes for sale or you’re targeting a brand-new vehicle, you should know about some of the choices you’ll want to stay away from when it comes to keeping your car clean. We’ll run through five of those right now.
Using Dishwashing Liquid
It might seem like using dishwashing liquid would be a perfectly acceptable thing to do with your new car. It’s probably just the same as the soaps designed for cars you’d get at an auto parts store, right?
Actually, that’s wrong. Dishwashing liquid, while fine on your dishes, can damage the exterior of a new vehicle. The reason is that many of the liquid dishwashing soaps you might buy have powerful anti-oil properties. They are designed to remove oil from pots and pans.
This can be devastating to your new vehicle. It has elements that are composed of rubber, plastic, and paint, and the dishwashing liquid can produce an adverse reaction when it comes into contact with them.
These products can also make the exterior of your new vehicle sticky. They can adhere to the car’s surface and be difficult to fully remove.
Applying Harsh Chemicals to a New Car’s Protective Coating
When you buy a brand-new car, the manufacturer typically applies a special protective coating. These days, wax or various kinds of ceramic coating are the most common.
You can strip away this coat’s beneficial properties if you wash the car with harsh chemicals. What you most want to avoid in the early going after buying a new vehicle are car shampoos that contain alkaline or acidic elements.
These can eat right through the protective layer of coating that should remain on your car for a few weeks after you have purchased it. While it isn’t designed to stay on there forever, you don’t want to speed up the process and neutralize that coating any earlier than you have to.
The kind of shampoo you want to look for will have a pH of 7, which is neutral. This kind of creamy, thicker shampoo is just what your car needs to get clean while still maintaining the protective coating for a little longer.
Washing Without the Right Accessories
As a little kid, you probably wouldn’t have dreamed of taking a bath without a rubber duck or your favorite other tub toys. Your new car is much the same.
A standard bucket and a kitchen sponge might be near at hand if you’re ready to clean off your new car without the first few weeks after you buy it. A regular bucket will more than likely have dirt particles in it, though.
You are liable to get those particles on the brush, and therefore on the vehicle’s surface. That can cause many small imperfections that will be visible to the naked eye and hurt the car’s eventual resale value.
A regular dish sponge is also a mistake because of what it can do to the paint job. That combination of a regular bucket and a dish sponge from your sink can harm your car more than you might believe.
Instead, go with the proper equipment for washing the car manually. That will probably include something like a special detailing bucket that comes with a dirt separator. You will also want to get a dedicated sponge that is rated for washing cars.
These things are actually a lot easier to find than you might imagine. Most car parts stores will carry them, but you can also order them online from Amazon or some other eCommerce entity if you would prefer to not have to go to a brick-and-mortar store location.
Washing the Car at an Automatic Car Wash
Another thing you will want to avoid is washing the car at a standard automated friction-based car wash. Again, you can refer back to what we said about the protective coating on your new car for several weeks after you buy it.
It’s probably impossible to keep from using an automatic, friction-based car wash at some point. In the meantime, though, it’s better if you use the special bucket and dedicated sponge that we mentioned a moment ago.
These will not damage the car’s protective coating, and you can also use them to get into all of the little crevices on your vehicle that a more abrasive car wash would probably miss.
Washing the Car in the Sun
There’s one more thing that you want to avoid if you are washing your brand-new car for the first time within the first few weeks of purchasing it. That is to wash your vehicle directly in the bright sunlight.
You might think that it makes sense to wash your car directly in the sun on a hot day because the heat will quickly dry it once you’ve finished. While that’s true, the sun’s rays can also damage the vehicle.
If you have freshly applied some shampoo, rather than streaming off of the car when you hose it down, the sun is liable to make it stick to the vehicle’s surface. That is not something that is meant to happen.
If you allow the shampoo to remain on the car, then it can stick to it and discolor some sections of it. You will likely be dismayed to see that in the days afterward. You will probably have to get the car detailed to repair the damage if you make this mistake.
Now, you know the main errors to avoid when washing a brand-new car.
Mak Fashion says
Frocks Brand in Pakistan: Famous Pakistani brands offering different sleek and rich frocks for women. frocks brand in pakistan