Adding a Murphy Bed to your home can be a rewarding experience, but you won’t get to enjoy it if you haven’t measured the space properly to have it installed. Instead of going in blind, here are some important steps to keep with you when you’re measuring for a Murphy Bed.
Step 1: Clearing The Room
When measuring to install superior murphy beds, you should first get everything out of the room so that you can see if you have enough space. You don’t want to try and measure when you have furniture in the way. You need to get a completely unobstructed view of the space.
Step 2: Picking The Wall
Determine which wall you’re going to be installing the Murphy Bed in. You want a wall that is wide enough and doesn’t have any other obstacles in the wall. This includes windows and doors, so you should pick the most blank wall that you have in that room.
Step 3: Measure The Width Of The Wall
Measure the width of the area where you intend to install your Murphy bed. You should measure from one corner to the other, ensuring that the tape measure is level to get the most accurate measurements. Measure it twice to make sure you’re accurate and record this number.
Step 4: Measure The Height Of The Ceiling
Measure the height of the room from the floor to the ceiling. Measure at multiple points along the wall to ensure that your ceiling isn’t uneven. An uneven ceiling means that your Murphy bed won’t sit well in its housing and could get stuck. Record the lowest measurement to ensure your Murphy bed will fit when folded down.
Step 5: Check For Obstructions
You should examine the wall your Murphy bed will be on to see if there are any fixtures that could be blocking the way. This includes light switches, outlets, and any wall fixtures. Measure their distance from the floor and from each side of the wall to ensure that they’re not going to be blocked by the Murphy bed mechanism or the mattress.
Step 6: Account For Clearance Space
You should take into account the amount of space a Murphy bed will need when it’s being unfolded so that it can operate smoothly. Check the manufacturer’s recommendations for the bed you want to install to ensure that you have the minimum amount of clearance space. In general, you should allow for at least 8 feet of space in front of the bed.
Step 7: Consult a Professional
When in doubt, you could always get a professional involved to help you do the measurements properly. It’s best to look for a professional who has installed a Murphy bed before so that they know exactly which measurements they should be taking.
Not only can a professional write down the correct measurements, but they can also help you figure out the best wall your Murphy bed should be installed on. If you’re interested in adding a Murphy bed to your bedroom, contact your local professional as soon as possible.
Leave a Reply